Lbl-lighting LED Illum MO 4" Round Dual Feed Canopy Manual de usuario Pagina 1

Busca en linea o descarga Manual de usuario para Encendiendo Lbl-lighting LED Illum MO 4" Round Dual Feed Canopy. LBL Lighting LED Illum MO 4" Round Dual Feed Canopy User Manual Manual de usuario

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 4
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 0
Installation Instructions for
4" Flexible Power Feed Canopy
980MRLA4PFC-LED
1
1.1
REMOTECNPY-_-LED
GP I :ENERAL RODUCT NFORMATION
This product is suitable for indoor dry locations only.
Minimum volume of the electrical box must be 6 cubic inches
(98 cubic centimeter).
Adjust the Fixture Height
LED-Illuminated Monorail
Strip the last 4” of the coaxial outer mesh to expose the inner
insulated wire.
Slide the metal sleeve down the wire to the edge of the coaxial
cable.
The overall fixture height (H) is measured from top of the
canopy to the bottom of the power feed. Leave an additional
4” of the coaxial cable for connecting to power.
Once the height is determined, cut the excess coaxial cable.
(H)
POWER FEED
HOUSING
NOTE: It is recommended to adjust the power feed
height before installing the canopy.
CANOPY
INNER WIRE
COAXIAL CABLE
4”
METAL SLEEVE
1A
1
2
3
4
1A 1A1B
4
3
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
Vista de pagina 0
1 2 3 4

Indice de contenidos

Pagina 1 - Adjust the Fixture Height

Installation Instructions for4" Flexible Power Feed Canopy980MRLA4PFC-LED11.1REMOTECNPY-_-LEDGP I :ENERAL RODUCT NFORMATIONThis product is suitab

Pagina 2 - Install the Power Feed Canopy

2Feed the coaxial cable up and into the canopy post.Slide the metal sleeve up into the canopy post and secure bytightening the M4 set screw with the p

Pagina 3

3Install the LED-Illuminated Monorailto the Power Feed CanopyRemove the power feed cap from the power feed housing.Completely back out the screw on th

Pagina 4 - SAVETHESE INSTRUCTIONS!

4POWERFEED CAPSCREWTighten the screw on the power feed cap for proper powerconnection.For dual power feed canopies: Repeat steps 1-5 for the secondpow

Comentarios a estos manuales

Sin comentarios