Lbl-lighting Omni Small LED Manual de usuario descargar pdf (Pagina 3)

Connect the white wire to the neutral power line wire.

Connect the black wire to the hot power line wire.

Connect the green wire to a suitable ground in accordance

with local electrical codes.

Reinstall the reflector into the housing and tighten all four

screws to hold it in place.

Install the Protective Cover

Reinstall all the cap screws around the perimeter of the cover.

Install the Decorative Shade (Optional)

DECORATIVE

COVER

SUPPORT ARM

ALLEN WRENCH

Use the Allen wrench to remove the upper shade support arm.

Place the shade into the slot in the lower shade support arm.

Line up the slot in the upper shade support arm with the top

of the shade.

Use the Allen wrench to attach the shade support arm to the

top of the fixture.

1 2 3 4

Sin comentarios

Lbl-lighting Omni Small LED Manual de usuario Pagina 3