Lbl-lighting Top II W Manual de usuario descargar pdf (Pagina 2)

Connect the transformer white wire to the neutral power line

wire with a wire nut.

Connect the transformer black wire to the hot power line

wire with a wire nut.

Place the transformer inside the electrical box. Use the

attached sticky pad to secure it against the electrical box.

STICKY PAD

Line up two backplate holes with the electrical box holes.

Mount the backplate to the electrical box with the two #8-32

screws provided.

In accordance with local electrical codes, make sure that the

backplate and the transformer green wire are grounded.

BACKPLATE

ELECTRICAL BOX HOLE

#8-32 SCREW

Connect each transformer low voltage wire (red wire) to one

fixture wire with a wire nut.

Place all wires and wire nut connections inside the electrical

box.

CANOPY

1.5MM ALLEN WRENCH

M3 SET SCREW

Place the fixture canopy onto the backplate. Level the fixture

vertically and tighten the two M3 set screws with the 1.5MM

Allen wrench to secure the fixture in place.

1 2 3 4

Sin comentarios

Lbl-lighting Top II W Manual de usuario Pagina 2